Lu-Mac

Facilities List

Lathes

  • LeBlond: 44" x 256" with 62" x 29" gap, digital readouts, hydraulic tracer
  • LeBlond: 20" x 72", trav-a-dials
  • Mazak: 21" x 80", full taper, trav-a-dials
  • American: 20" x 156" with collets
  • Webster-Bennett: 54" V.B.L. 62" swing, readouts, tracer
CNC Equipment
  • Mazak H-15 two pallet Horizontal Machining Center, 20" x 20" pallets
  • Mazak V655 Vertical Machining Center 26" x 89" table, probe (New 1995)
  • Mazak VQC 20/50 Bridge type Vertical Machining Center with 35" x 40 table and 3D controls for molds
  • Mazak Quick Turn 10 Lathe 15" x 21"
  • Mazak Quick Turn 35N Lathe 20" x 40" - 40 HP. (New 1996)
  • Okuma-Howa Act 5 Lathe 23.5" x 49.5", 50 HP.
  • Mazak Power Master Lathe 34" x 160", 60 HP. CNC (New 1996)
  • Lucas: 6" Horizontal Boring Mill - 60" x 144" table - Retrofitted 1997 - 96" V. x 144"H. Travels.
  • Mazak Micro Center V14" x 36" Table 5" Spindle
  • Mazak Power Center H22 ten pallet Horizontal Maching Center, 31 1/2" x 31 1/2" pallets
Milling Machines

  • Bridgeport: Series 1,2 JS variable speed, 2 HP. Equipped with readouts
  • Bridgeport: Series II, 5 HP. Variable speed readouts
  • Bridgeport: Series II, 3 HP. Variable speed readouts
  • Van Norman Universal Head Milling Machine
  • Zayer Universal Head Mill 28" x 100" Table with Readout
Horizontal Boring

  • 6" Lucas HBM, table type, 60" x 144" table, 48" spindle travel, 96" vertical travel, 144" horizontal travel, 60" Z travel, cnc control.
  • 5" Lucas HBM, table type, 48" x 60" table, 36" spindle travel, 60" vertical travel, 84" horizontal travel, 48" Z travel, digital readouts, air-lift rotary table
  • 5" Lucas HBM, table type, 48" x 74" table, 36" spindle travel, 72" vertical travel, 100" horizontal travel, 48" Z travel, digital readouts, air-lift rotary table
  • 5" Lucas HBM, floor type, 96" vertical travel, 156" horizontal travel, bed plate 78" wide x 24'4 long - digital readouts
Slotters

  • Pratt & Whitney keyseater 12", Model "B"
  • Bement, Miles & Co., 40" x 40" table, 18" stroke
Surface Grinder

  • Thompson, 6" x 18" table
Drill Grinders

  • Darex SP2500 - 1/16" to 1"
Saws

  • (2) Marvel Series 8 Mark II 20" x 18" cut
  • DoAll 16' cut
Grinders

  • (2) Disc Sanders, abrasive, Apex Model "S", 16"
  • Hammond Tool Grinder
  • Cincinnati Production Buffer and Polisher
  • Dayton Disc and Belt Sanders
Cranes

  • (2) 5 ton overhead
  • (3) 10 ton P.H. overhead
  • (4) 2 ton overhead
  • Misc Small Hoists
Forklifts

  • Clark, 8,000 lb
  • Caterpillar, 5,000 lb.
  • Linde, 12,000 lb.
Miscellaneous

  • 2000 International 4700 10 Ton Truck
  • 2" Rigid 535 Bolt Machine, studs up to 22"
  • Beaver Bolt & Pipe Threader 2 1/2" R.H. or L.H.
  • Bending table
  • Hydraulic Press
  • Sand Blaster with dust collector
  • 12" Weld Positioner, 3 jaw
  • 48" Weld Positioner, 4 jaw
  • 450 ton Press, straightening and pressing, area 7' high, 42' wide with tooling to press pinions off and on
  • 400 ton Wheel Press, 24" ram to tailstock
  • 200 ton Wheel Press, 8' ram to tailstock
  • Scotsman Ironworker 120 ton
  • Leroy 40HP Rotary Screw Air Compressor
  • Joy Twistair 40 HP Rotary Screw Air Compressor
  • Pad Pak Jr. System for Packaging
Welders

  • (2) Lincoln Ideal Arc, 400/400 AC/DC
  • Lincoln R35-600, Innershield, MIG
  • Lincoln CU-400, Innershield, MIG
  • Lincoln RS3-400, Innershield, MIG
  • Miller Syncrowave TIG, 250
  • Hobart Motor Drive, 300 AMP, DC
  • (2) Rototec 80 Spray Weld Units
  • Miller Deltaweld 452 MIG / innershield
  • Miller Dimension 652 MIG / innershield
  • (4) Miller Arc Welders 400 amp. DC
  • Miller MP30E 300 amp mig / innershield